products detial
What we can do ? different country different requirement all we can offer.
Mid-voltage ( kV) | 3.6~35kv (E.g. 35,33,24,22,20,18,15.75,13.8,13.2,12,11,10.5,10,7.2,6.6,6.3,6 etc.) |
To Low voltage ( V) | 100-660V (E.g. 100,110,115,120,127,208,200,220,230,240,346,380,400,410,415,440,480,660 etc.) |
Frequency (HZ) | 50Hz or 60Hz |
DFW-24 DFW-35 High Voltage Cable Branch Box
Ⅰ.Overview
European cable branch box produced by our company,with its excellent performance,standardized design,beautiful appearance,cable engineering equipment widely used in cable system in the distribution network,in major industrial parks, residential areas, the densely populated city, commercial center and high-rise buildings and other places widely accepted to open the door, it one-way and transverse through bus as the main feature, with small width, flexible combination, insulation, sealing and other significant advantages, in accordance with the rated current can generally be divided into 600A main circuit and 200A circuit is two 600A, the main circuit uses the screw bolt connection, 200A branch circuit adopts pull type connection and can load plug.
Ⅱ.Application
DFW high voltage cable branch box series, widely used in 35KV, 24KV, 10KV cable system node connection, is the cable from the switch cabinet after the collection and the main electrical equipment.Cable distribution box adopts imported high grade rubber insulated tightly coated with insulation, without dew charged body, switch box adopts SF6 insulation load switch.
DFW box designed for outdoor operation without maintenance, safe and reliable, the protection level of IP33, the underground tap can be flooded. The products are widely used in the distribution network of City Industrial District, residential, commercial, mining and patina, that automobile, petroleum and chemical, cement and other large enterprises and other occasions, especially suitable for the reconstruction of city power grid, which can greatly save electrical equipment and cable investment, improve the reliability of power supply.
Ⅲ.Features
1,Compact structure, small footprint, easy to install, easy to operate, maintenance free,
2,The box body is made of steel plate or stainless steel plate with a thickness of 2mm. It is specially designed for corrosion protection and special painting
3,Full protection structure, suitable for high temperature, cold, flooding, high dust area
4,Fully sealed, fully insulated structure, no insulation distance, high voltage charged parts are all silicone rubber or EPDM prefabricated cable connector, to ensure personal safety.
5,Flexible combination can make the number of outlets to seven, can be combined with SF6 load switch ring network power supply, fully meet the requirements of a variety of wiring
6,The cable connector can be used as a load switch, plug, disconnect the load current of 200A,
7,When the fault indicator is installed, the circuit fault can be detected quickly.
8,One-time investment is small, reduce the length of the cable, does not account for the construction area, save money.
Scan to add WeChat